SAS 6 Gbps Dell ML6000

Any requests with your Hardware.

Moderator: sepma

Post Reply
jiri.provaznik
Posts: 2
Joined: June 14th, 2010, 10:54 am
Spam Stop: No
SEP sesam: Software

SAS 6 Gbps Dell ML6000

Post by jiri.provaznik » December 20th, 2010, 9:27 pm

Does anybody use ML6000 library via SAS 6 Gbps? I have problem with this configuration. Backup via SAS 3 Gbps is OK.

fosep
Posts: 15
Joined: May 18th, 2005, 7:02 pm
Location: Miesbach

Re: SAS 6 Gbps Dell ML6000

Post by fosep » January 28th, 2011, 9:50 am

The problem could be found.
After connecting the library to one SCSI-port and also the drive to one SCSI-port, no errors occured anymore. It seems to be a driver problem.

Regards, fosep

jiri.provaznik
Posts: 2
Joined: June 14th, 2010, 10:54 am
Spam Stop: No
SEP sesam: Software

Re: SAS 6 Gbps Dell ML6000

Post by jiri.provaznik » January 28th, 2011, 10:00 am

Do you mean controller and library ML6000 are connected via 2 cables? If so, I have found this "solution" too. If this configuration is applied no errors occur and backup tasks are finished OK.

Thanks for your reply.

fosep
Posts: 15
Joined: May 18th, 2005, 7:02 pm
Location: Miesbach

Re: SAS 6 Gbps Dell ML6000

Post by fosep » January 28th, 2011, 10:09 am

Hy,

I'm from SEP support and I just wanted to give people a solution, if they've got the same problem. ;)

Greetings, fosep

Post Reply